Contents

• Procurement
• Bill of Materials

Procurement

Multiple parts must be purchased from vendors before the final assembly of the stereoscope is attempted. Those parts are outlined in the bill of materials (BOM) below, along with sample vendors they can be purchased from. In addition to the parts and tools in the BOM, access to a 3D printer and filament is required. PETG and PLA filament have both been tested for this design and PETG is the most durable.

Bill of Materials

• 4x 50mmx50mm Mirror - Mirror glass used in the stereoscope.
• 6x M3 Hex Nut - Hex nuts used to hold some pieces together.
• 2x Square Nut - Square nuts used to hold some pieces together.
• 6x M3x12mm Socket Head Screw - Screws used throughout this design.

• 1x Glass Cutter - Hobby glass cutter to cut the mirror glass.
• 1x 2.5mm Hex Wrench - Used to tighten all of the M3 screws in this design.